|
Product Details:
|
| Product Name:: | 12V100Ah Lead Acid Battery Replacement Battery | Rated Voltage:: | 12.8V |
|---|---|---|---|
| Nominal Capacity:: | 100Ah | Energy:: | 1280WH |
| Combination:: | 4S1P | Battery Size:: | 324*168*223mm |
| Weight:: | 12kgs | Application:: | Solar Energy |
| Color:: | Black+Grey | Features:: | High Cycle Life |
| High Light: | 12V100Ah Lithium iron phosphate battery,li ion battery storage Solar Street Lights,Lithium iron phosphate battery 4S1P |
||
Description:
MATRIX lithium battery has a much longer cycle life capacity, and is easier to maintain compared to other battery technologies. The LiFePO4 technology has better thermal and chemical stability, which improves battery safety and packed with power in a small and lightweight footprint. Easily uses the same space as your existing 12V battery and replaces lead acid, AGM or Gel battery applications in RVs, boats, commercial vehicles, off grid back up power and much more. Not intended to replace starting batteries.
Specification:
|
No.
|
Item
|
General Parameter
|
Remark
|
||
| 1 | Rated Capacity | Typical | 100Ah | Standard discharge(0.2C5A) after Standard charge | |
| Minimum | 95Ah | ||||
| 2 | Nominal Voltage | 12.8V | Mean Operation Voltage | ||
| 3 |
Voltage at end of Discharge |
12V | Discharge Cut-off Voltage | ||
| 4 | Charging Voltage | 14.6V | |||
| 5 | Internal Impedance | ≤50mΩ |
Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
||
| 6 | Standard charge |
Constant Current 0.2C Constant Voltage 3.65V 0.1C cut-off
|
|||
| 7 | Standard discharge |
Constant current 0.2C end voltage 2.3V
|
|||
| 8 | Fast charge |
Constant Current 0.5C Constant Voltage 3.65V 0.1C cut-off
|
|||
| 9 | Fast discharge |
Constant current 1.5C end voltage 2.3V
|
|||
| 10 | Maximum Continuous Charge Current |
0.5C
|
|||
| 11 | Maximum Continuous Discharge Current |
1C
|
|||
| 12 | Operation Temperature Range | Charge |
0~45℃ 60±25%R.H. |
Charge at a very low temperature such as blew 0℃,will be get a lower capacity and reduce cycle life of the battery | |
| Discharge |
-10~65℃ 60±25%R.H. |
||||
| 13 | Storage Temperature Range |
-20~25℃ 60±25%R.H. |
Do not storage exceed half year. Must charge once when storage for half year. must charge the battery which with protect circuit when storage for three months. | ||
Features:
1. Extremely high number of charge/discharge cycles
2. > 10 Year lifespan with proper maintenance
3. Built-in smart battery management system
4. Wide operating temperature range
5. Unsurpassed high temperature performance
6. Green energy without metal contaminant
7. Low maintenance
8. High amp capacity
9. Stable output voltage
10. Little self-discharge
11. Lifetime customer support
12. Over charging or discharging protection.
13. Over current & short circuit protection.
14. High & low temperature disconnects
Connect in series for 24V or 36V or 48V Battery Bank, or Connect in Parallel for Larger Capacity.
BMS Safety Protection
Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely
Convenient removable carry handle
Lightweight
Short circuit protected
Physical damage to battery case will not cause fire
Excessive thermal exposure will not cause a fire
Able to withstand over-charge/over-discharge without damage to the battery
Sophisticated Battery Management System (BMS)
Application:
UPS power backup
Solar street lights
Solar energy storage system
Solar panels
Solar street lights
About Us:
MATRIX factory is located at Fuda industrial Zone in Huizhou City, covering an area of 12,000 square meters, employs nearly 200 people, and has a complete set of most advanced production, testing and aging equipment, with an annual capacity of more than 100 MWH lithium batteries.
Compared with traditional lead acid battery, lithium battery has the advantages and characteristics of being environment-friendly, guarantee good safety, longer life span, smaller size, lighter weight which are suitable for industrial production.
Matrix has a technical team composed of high-quality talents, structural engineers, process engineers, IE engineers. As the first batch of domestic lithium battery industry witnessed the rapid development of lithium batteries in China, Matrix has accumulated a wealth of Experience in battery R&D and production, with frequent studies abroad and active paticipation in traning and seminars in China,all to improve its professional quality, the team is innovative and able to meet challenges, and are committed to bringing quality and reliable technology to the consumers.
FAQ:
1. Will a 12V, 100Ah lithium iron phosphate battery give a longer run time than a 12V, 100Ah lead-acid battery under the same conditions?
Yes. Lithium iron phosphate batteries provide more useable capacity than a lead-acid equivalently rated product. You can expect up to twice as much runtime.
2. What is a BMS? Is it necessary?
A Battery Management System is necessary for control and protection during discharge and charging. The BMS provides CAN bus communication of battery status ‘state of charge’ and alarms etc. It may also be used without CAN bus interface with just basic analog inputs and outputs for simpler systems.
3. What is the expected life of a LiFePO4 battery?
Battery life is measured in life cycles and MATRIX’s LiFePO4 is typically rated to deliver 2000 cycles at 70% depth of discharge (DOD). Actual life expectancy is dependent on several variables based on your specific application. If used for the same application, a LiFePO4 battery can last up to 10X longer than a lead-acid battery.
Contact Person: Echo
Tel: 15889310503
