|
Product Details:
|
| Capacity: | 56Ah | Normal Charge Time: | 2.5h |
|---|---|---|---|
| Configuration: | 12S1P | Discharge Cut-off Voltage: | 30V |
| Capacity At EOL: | 70% | Operating Temp.: | Charge: 0℃-55℃ / Discharge:-20℃-55℃ |
| Size: | 385 X 338 X 245mm | Cell: | LF50K(3.2V 50Ah) |
| IP Grade: | IP67 | Weight: | 27 Kgs |
| High Light: | 50ah 36V Golf Cart Battery Matrix,Matrix lithium golf battery,Lifepo4 36V Golf Cart Battery |
||
Lithium Golf Battery 36v 50ah Lifepo4 From Matrix For Lead Acid Battery Replacement
Features of our lifepo4 battery pack
-- Bulit in BMS.Provides overall protection and battery obtains independent balancing function.
-- Capable to deliever high discharge current. Max discharge current 175A,up to 320A.
-- Can be connected in series and parallel
-- Have passed different tests.No explosion,no smoke,no leakage.
| Technical specificaiton | |
| Model | S3856 |
| Nominal voltage | 38V |
| Nominal capacity | 56Ah |
| Stored energy | 1.92wh |
| Life cycles | >3500 times |
| Typical mileage | up to 60-70 miles |
| Charge current | 22A |
| Standard discharge | 50A |
| Maximum discharge | 200A (10S) |
| Charging time | |
| Quick charge | 2.5h |
| Standard charge | 8.0h |
| General | |
| Cell combination | 12S1P |
| Cell assembly | LF105, 3.2V 105Ah |
| Weight | 27kg (59lbs) |
| IP rate | IP67 |
| Dimension | |
| L | 38.5cm |
| W | 33.8cm |
| H | 24.5cm |
Applications
Lead Acid battery Replacemement
Solar/PV/Wind system
Go Kart,High Power Car Battery
Water Pump,Forklift EV Tricycle,Monitoring System
Home/out door energy storage
Matters needing attention
(1) Please check if spare parts are completed when open the package and read the operation manual carefully.
(2) Do not make the battery Short Circuit, do not over charge and discharge.
(3) Please charge the new battery to full capacity before discharge for the first use.
(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.
(5) Checking the voltage of battery.
(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.
(7) Rivet or screw is used for battery connector.
(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevantconnection which fixed with screws.
(9) The charger used should be approved by our company in order to match with our lithium batteries.
(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above . It won’t be within warranty range.
Contact Person: Lesley
Tel: +8615583850236
